Sunday, November 15, 2009

Installation of Deliberant CPE 2 - 2.4 GHz High Powered WiFi Radio System.......


Yesterday afternoon I got up on top of the roof and took this picture looking West towards the Clubhouse. You can see how a lot of the RV spots are filled up. Just a week or so ago most of these were empty.   It will fill up even more by the first of the year.  Hundreds of other RV parks are the same way.....all filling up. The local businesses are loving it, too.  There are "WELCOME WINTER TEXANS" signs up all over the Valley.

Recently, I've been playing around with a little project and I have about finished it up. I am installing a WiFi Radio system that will enhance my reception of WiFi anywhere we are when we are traveling and I can use it to broadcast a "hot spot" of my own WiFi for guests when they visit us in the Black Hills of South Dakota. Mainly, I got it for my own reception.  Many WiFi signals are so weak in campgrounds that the signal keeps dropping out; thus dropping us from the Internet.  That aggavates the heck out of me, so this should help. Plus I had FUN building it...

This is the Marine mast with the Omni 2.4, 12 db gain antenna mounted on top. The mast is easily folded over so it is laying down when traveling or not in use. The mast and antenna are a total of 8 ft high.  I put the mount at a close proximity of the ladder handrail because of the strength of the roof in that area. It is extremely stable and strong. The white block you see just a few feet ahead of the mast is a hand made PVC hold down for the antenna when it is folded down...

Above is a picture of the "Marine Mount".  It is made of nylon and is unbelievably strong. My friend Mark Bruss has a mast like this that he has been using for a couple years and I've seen it withstand some very heavy winds.  The neat thing is the manner in which it folds down so easily....just flip up the lever on the right and fold it down.  That's all there is to it.

Above is the "Radio".


I mounted the Deliberant 2.4 GHz High powered CPE 2 "Radio" right behind my King Dome. The Radio is connected to the Antenna by Coax, which was pre-made and came with the Antenna. I am thankful of that because I learned from previous experience installing "N" connectors on the coax for my Ham radio  antennas was TOUGH.  But it has been several years since I have been using them with 9913 semi hard line coax and they have no doubt improved them.  The unit is connected to our Cradlepoint MBR 1000 Router with smaller, easy to handle, CAT5 connector wire. Now it's ready for the "Smoke" test. I  will rely on my friend Mark Bruss for that and want to thank him very much for his help and guidance with this project.

This little project was about the extent of anything outside of the normal stuff this week.. We did ship out a couple PressurePro Systems and received a large stock order from the Company. It takes me quite a while to check and inventory the order along with boxing everything up and packaging it for shipment. Sure enough, we were short 6 of the small Rubber Duck antennas. Ms Pat called and reported the shortage and it was agreed they would ship them immediately.

It was a GREAT WEEK!!!

Meanwhile we are planning on leaving in a few minutes on our 5TH Motorcycle ride in the Valley.  Where are we going? Oh, we have a couple options.  When we head out the gate we will make a quick decision and let you know where we end up.  It's getting mighty hard to find a different place to go, but we will just GO!!!! Might even end up at a Harley dealer...who knows!

God Bless you all....

Mike

This Blog is Published every Sunday and Wednesday..

6 comments:

Jerry and Suzy said...

Too much info for me! All those numbers and letters are cornfusing to us backlanders. But have at it, Mike -- maybe we'll latch on to your signal someday and use YOUR bandwidth rather than our own!

Rick said...

That looks like a great setup, Mike. That antenna should work to pull in even the weakest of signals. Makes my little 4" Power Boost Antenna look pretty lame! Just wondering, can that antenna be used to enhance and receive signals from carriers like Verizon and Sprint too, in addition to park wifi signals?

Roadrunner Chronicles said...

I like your antenna design. May come in handy. Great post!

Bruce said...

That antenna looks like it could probe outer space. Way to go, that looks like a difficult project.

Rick OzTown said...

We're talking 7 months later. So how did the system winter in south Texas? Did you use it to attach to others' systems or just to provide a "hot spot" source of WiFi linking to the Internet?

I just ran into a friend's closed system pair of the CPE 2 units yesterday. Worked great for them.

Where did you purchase yours?

73, K5FNI

Rick OzTown said...

Oh, I forgot to mention that I'm in Mathis, which is also in south Texas.